The bus coupler 3 connects the KNX system to a KNX application module.
The combination of bus coupler 3 and application module represents a functional unit.
In the ETS project, this unit is configured in the form of the application program of the application module.
Push Button Sensor 3
Mounting on bus coupler 3.
Disassembly safeguard by screw connection.
Two multicoloured status LEDs per operating surface.
Integrated temperature sensor for measuring and forwarding the ambient room temperature.
Rocker or button function can be set for each operating surface.
Rocker function: Switching, dimming, blind control, value transmitter 1-byte, value transmitter 2-byte, scene auxiliary unit, and room temperature controller auxiliary unit.
Button function: Switching, dimming, blind control, value transmitter 1-byte, value transmitter 2-byte, scene auxiliary unit, and room temperature controller auxiliary unit.
Controller auxiliary unit: Operating mode changeover with normal and high priority, defined selection of operating mode, toggle between various operating modes, switching of presence condition, setpoint offset.
Blocker for blocking individual button or rocker functions.
Alarm message displayed through all LEDs flashing.
Multicoloured status LED (red, green, blue) can be configured globally or separately. A superimposed function can be activated on the bus whereby the colour and display information of individual status LEDs can be modified according to priority.
Communication object for brightness control of status LED and illumination of inscription space (e.g. for reducing brightness in bedrooms at night).
Inscription space illumination for rocker sets with inscription space.
Illumination of inscription space ON, OFF, automatic switch-off, or switchable via object.