Secure remote access via Gira X1 iOS and Android app and HomeServer iOS app.
Secure remote access to web-based visualisations.
Secure remote maintenance and remote programming of the Gira HomeServer, Gira G1, Gira X1, Gira L1, and Gira KNX IP router.
Secure remote programming via the Gira HomeServer experts.
Secure remote programming via the Gira Project Assistant (GPA).
Secure remote maintenance and remote programming of KNX projects using ETS4 or ETS5. The programming and diagnosis is supported via group and bus monitor.
Secure remote access to HTML pages in the smart home network (e.g. camera, NAS, router, switch).
Secure data transfer courtesy of SSL/TLS encryption.
Portal server is located in Germany and is subject to German laws on data.
Independence from internet provider and routers used. Secure remote access even with IPv6 Dual Stack Lite - (e.g. with Unitymedia), LTE, or UMTS connections.
Management of access to the secure connections via KNX communication objects, Gira X1 ap, Gira HomeServer app, and QuadClient.
Status signalling of the secure connections via KNX communication objects, Gira X1 ap, Gira HomeServer app, and QuadClient.
Send KNX status messages via email. An attachment can be added to the email, as an option.
Send KNX status messages by SMS or voice call via the chargeable, additional service sms77 or MessageBird.
Optimised KNX IP communication, for mobile or very slow connections.
Supports the accelerated transfer of the ETS to KNXnet/IP devices via a direct KNX IP connection.
Two RJ45 sockets with switch functionality support simple loop-through of the patch cable.
Quick and convenient Gira S1 start-up via the Gira device portal.
2 GB of data each month.
Unlimited operating life and 5 years' guaranteed server operation.
Functional extensions and updates via firmware and software updates.
Firmware update is performed via the Gira Project Assistant (GPA).
Hardware prepared for KNX Secure. Future firmware update required.
Rated voltage: DC 24 to 30 V
Power consumption: 2 W
IP communication: Ethernet 10/100 BaseT (10/100 Mbit/s)
IP: 2 x RJ45 jacks
KNX: Connection and junction terminal
Ambient temperature: 0 °C to +45 °C
KNX: TP1, S mode (ETS)
microSD card: for future applications