Theben HME 6 T KNX

Low stock.

Available for Next Day Delivery.

Available for Next Day Collection.

• 6-way heating actuator MIX2
• With 6 temperature controllers (P/PI) for heating and cooling
• Extension module MIX2
• For upgrading to maximum of 18 channels
• For controlling 6 thermal actuators 24 V - 240 V AC in 2 groups with 3 outputs and 450 mA each
• (Due to the switch-on behaviour of the actuators, we recommend not to exceed a maximum load of 3x1 actuators 24 V AC or 3x5 actuators 230 V AC)
• Short-circuit-proof and overcharge protected
• Continuous or switching actuating value selectable
• Valve protection function can be deactivated
• With the modes: comfort, standby, night as well as frost/heating protection
• Changeover to summer mode possible
• Up to two extension modules MIX or MIX2 can be connected to one base module
• Device and KNX bus module can be swapped independently of each other
• Removable KNX bus module enables devices to be changed without reprogramming
• Manual set-up and use of actuator is possible without KNX bus module
• LED switching status display for each channel
• Manual operation on device (even without bus connection)

Technical data
Stand-by consumption: ~0,2 W
Width: 4 modules
Installation type: DIN rail
Number of channels: 6
Type of connection: Screw terminals
Max. cable cross section: Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² | Stranded wire with end sleeve: 0.5 mm² to 2.5 mm²
Switching output: Not potential-free
Output: Triac, 0,45 A
Voltage output: 24 V AC - 240 V AC
Frequency output: 50 – 60 Hz
Suitable for SELV: Yes if all channels switch at SELV
Switching of various phases: Possible
Ambient temperature: -5 °C … +45 °C
Type of protection: IP 20
Protection class: II according to EN 60 669

More Information
More Information
SKU THE4930245
Manufacturer Theben
Manufacturers Reference Theben
Type Heating Actuator
Range MIX2
Medium KNX TP
Installation Din Mounted
Channels 6
Module Size 4 Module
Customs Tarif Number 85362010