Steinel IS 345 KNX

Huge reach. Infrared motion detector IS 345 for indoors and out, ideal for passageways, corridors and commonly used spaces, installation height 5 m, detection zone 12 x 4 m (radial) and 20 x 4 m (tangentiall). Available either in round or square surface-mounted and concealed version.
Pioneering sensor technology. Targeted detection.
Aisles and long corridors place special demands on sensor performance. The detection area of the sensor must be narrow, but long. Only in this way can the fewest possible sensors cover sections of the greatest possible length. Tried and proven over and over again, the IS 345 is the specialist for indoor applications of this type. It is specially designed for detection in corridors and has an angle of aperture of 45°. This means that it can watch over an area of up to 20 x 4 metres tangentially.
Technical Specifications
Dimensions: 78 x Ø 124 mm
Model: Movement sensor
Power supply: KNX bus voltage
Sensor type: Passive infrared
Recommended installation height: 2.5-5 m
Reach, radial: 12 x 4 m
Reach, tangential: 20 x 4 m
Detection angle: Aisle with 45° angle of aperture
Twilight setting: 2 - 1000 Lux
Light output: 2 channels, including dimming level and basic light level
Presence output: Switching response irrespective of light level
HVAC output: Switching response irrespective of light level
Photo-cell controller output: Switching response governed by light level
Further outputs: Light level, sabotage protection
Time setting: 1-255
IP rating: IP20
Temperature range: -20-+50
Version: KNX - Surface installation, square
Housing: UV-resistant plastic
Model: KNX
Huge reach. Infrared motion detector IS 345 for indoors and out, ideal for passageways, corridors and commonly used spaces, installation height 5 m, detection zone 12 x 4 m (radial) and 20 x 4 m (tangentiall). Available either in round or square surface-mounted and concealed version.
Pioneering sensor technology. Targeted detection.
Aisles and long corridors place special demands on sensor performance. The detection area of the sensor must be narrow, but long. Only in this way can the fewest possible sensors cover sections of the greatest possible length. Tried and proven over and over again, the IS 345 is the specialist for indoor applications of this type. It is specially designed for detection in corridors and has an angle of aperture of 45°. This means that it can watch over an area of up to 20 x 4 metres tangentially.
Technical Specifications
Dimensions: 78 x Ø 124 mm
Model: Movement sensor
Power supply: KNX bus voltage
Sensor type: Passive infrared
Recommended installation height: 2.5-5 m
Reach, radial: 12 x 4 m
Reach, tangential: 20 x 4 m
Detection angle: Aisle with 45° angle of aperture
Twilight setting: 2 - 1000 Lux
Light output: 2 channels, including dimming level and basic light level
Presence output: Switching response irrespective of light level
HVAC output: Switching response irrespective of light level
Photo-cell controller output: Switching response governed by light level
Further outputs: Light level, sabotage protection
Time setting: 1-255
IP rating: IP20
Temperature range: -20-+50
Version: KNX - Surface installation, square
Housing: UV-resistant plastic
Model: KNX
Huge reach. Infrared motion detector IS 345 for indoors and out, ideal for passageways, corridors and commonly used spaces, installation height 5 m, detection zone 12 x 4 m (radial) and 20 x 4 m (tangentiall). Available either in round or square surface-mounted and concealed version.
Pioneering sensor technology. Targeted detection.
Aisles and long corridors place special demands on sensor performance. The detection area of the sensor must be narrow, but long. Only in this way can the fewest possible sensors cover sections of the greatest possible length. Tried and proven over and over again, the IS 345 is the specialist for indoor applications of this type. It is specially designed for detection in corridors and has an angle of aperture of 45°. This means that it can watch over an area of up to 20 x 4 metres tangentially.
Technical Specifications
Dimensions: 78 x Ø 124 mm
Model: Movement sensor
Power supply: KNX bus voltage
Sensor type: Passive infrared
Recommended installation height: 2.5-5 m
Reach, radial: 12 x 4 m
Reach, tangential: 20 x 4 m
Detection angle: Aisle with 45° angle of aperture
Twilight setting: 2 - 1000 Lux
Light output: 2 channels, including dimming level and basic light level
Presence output: Switching response irrespective of light level
HVAC output: Switching response irrespective of light level
Photo-cell controller output: Switching response governed by light level
Further outputs: Light level, sabotage protection
Time setting: 1-255
IP rating: IP20
Temperature range: -20-+50
Version: KNX - Surface installation, square
Housing: UV-resistant plastic
Model: KNX
Huge reach. Infrared motion detector IS 345 for indoors and out, ideal for passageways, corridors and commonly used spaces, installation height 5 m, detection zone 12 x 4 m (radial) and 20 x 4 m (tangentiall). Available either in round or square surface-mounted and concealed version.
Pioneering sensor technology. Targeted detection.
Aisles and long corridors place special demands on sensor performance. The detection area of the sensor must be narrow, but long. Only in this way can the fewest possible sensors cover sections of the greatest possible length. Tried and proven over and over again, the IS 345 is the specialist for indoor applications of this type. It is specially designed for detection in corridors and has an angle of aperture of 45°. This means that it can watch over an area of up to 20 x 4 metres tangentially.
Technical Specifications
Dimensions: 78 x Ø 124 mm
Model: Movement sensor
Power supply: KNX bus voltage
Sensor type: Passive infrared
Recommended installation height: 2.5-5 m
Reach, radial: 12 x 4 m
Reach, tangential: 20 x 4 m
Detection angle: Aisle with 45° angle of aperture
Twilight setting: 2 - 1000 Lux
Light output: 2 channels, including dimming level and basic light level
Presence output: Switching response irrespective of light level
HVAC output: Switching response irrespective of light level
Photo-cell controller output: Switching response governed by light level
Further outputs: Light level, sabotage protection
Time setting: 1-255
IP rating: IP20
Temperature range: -20-+50
Version: KNX - Surface installation, square
Housing: UV-resistant plastic
Model: KNX