Theben JMG 4 T KNX

THE4930250
Available for 3-5 working days Delivery
£236.53
Details


• 4-way blind actuator MIX2
• Base module MIX2
• Can be upgraded to maximum of 12 channels
• For controlling drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps
• Up to 2 extension modules can be connected to a base module
• Up to two extension modules MIX or MIX2 can be connected to one base module
• Device and KNX bus module can be swapped independently of each other
• Removable KNX bus module enables devices to be changed without reprogramming
• Manual set-up and use of actuators is possible without KNX bus module
• Free combination of switches, dimming, blinds and heating control as well as binary inputs
• For controlling drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps
• Manual operation on device (even without bus connection)
• LED Up and Down switching status display for each channel
• Potential-free contacts for Up and Down per channel
• Setting option for phase sequence and running time of device
• Copy function for fast configuration

Technical Data

Operating voltage KNX: Bus voltage, <4 mA
Operating voltage: 110 – 240 V AC
Stand-by consumption: ~0,3 W
Capacity loss max: 2 W
Frequency: 50 – 60 Hz
Number of channels: 4
Width: 4 modules
Installation type: DIN rail
Type of connection: Terminal screws | Bus connection: KNX bus terminal
Max. cable cross section: Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² | Stranded wire with end sleeve: 0.5 mm² to 2.5 mm²
Type of contact: NO contact, 6 A
Switching output: Potential-free, for SELV, if the whole device switches SELV
Ambient temperature: -5 °C … +45 °C
Type of protection: IP 20
Protection class: II according to EN 60 669


More Information
More Information
SKU THE4930250
Manufacturer Theben
Manufacturers Reference Theben
Type Blind Actuator
Range MIX2
Medium KNX TP
Installation Din Mounted
Channels 4
Module Size 4 Module