KNX switch actuator 16-gang KNX blinds actuator 8-gang

• Switching of electrical loads with floating contacts
• Switching of electrically-driven blinds, shutters, awnings and similar hangings
• Mounting on DIN rail according to EN 60715 in distribution boxes

• Outputs can be operated manually, construction site mode
• Feedback in manual mode and in bus mode
• Disabling of individual outputs manually or via bus
• Central functions
• Cyclical monitoring
• KNX Data Secure compatible with ETS 5.7.3 or higher
• Can be updated with the ETS Service App

• Operation as NO or NC contacts
• Feedback function
• Logic operation and forcing function
• Central switching function with collective feedback
• Time functions: switch-on delay, switch-off delay, staircase lighting timer with pre-warning function
• Scene function
• Operating hours counter

• Suitable for 230 V AC motors
• Operation modes ‘Blind with slats’, ‘Shutter/awning’, ‘Ventilation flap/skylight’
• Blind/shutter position directly controllable
• Slat position directly controllable
• Feedback of movement status, blind/shutter position and slat position
• Cyclical feedback during movement
• Forced position through higher-level controller
• Safety function: rain alarm, frost alarm, 3 independent wind alarms
• Sun protection function with auto Heating/Cooling
• Scene function

The total current of two adjacent outputs must not exceed 20 A.