Curtain position can be directly controlled.
Slat position can be directly controlled.
Behaviour after bus voltage failure and recovery can be set.
Separately parameterisable movement times with movement time extension for moving into the upper end position.
Central control of all blind outputs possible.
Feedback of the curtain position or slat position.
Feedback can be delayed until after the recovery of bus voltage.
Assignments of up to five different safety functions (three wind alarms, one rain alarm, one frost alarm) or optionally with cyclical monitoring.
Forced setting function can be realised for each blind output.
Integration in scenes is possible, 8 internal scenes at the most can be parameterised per channel.
Memory function for light scenes.
Sun protection function with fixed and variable curtain or slat positions can be activated.
Extended sun protection with extensive control functions.
Integration in temperature management of building possible.
Blocking of individual outputs manually or with bus.
Active or passive (object can be read out) cyclical feedback functions.
Building site operation: Outputs can be operated manually without bus voltage with operating voltage only.
For mains voltage AC 230 V.
Connection of various external conductors.
Independent control of the two blind outputs.
Automatic curtain moving time detection for AC 230 V drives with mechanical stop position switches.
KNX: Connection and junction terminal
Load: Screw terminals
Rated voltage: AC 230 V, 50/60 Hz
AC switching voltage: AC 230 V, 50/60 Hz
Switching capacity AC 230 V: 6 A / AC1
Switching voltage DC: DC 12 to 48 V
DC 12/24 V: 6 A
DC 48 V: 3 A
Connections: max. 4 mm²