GIRA KNX switching actuator, 1-gang 16 A

Available for 3-5 working days Delivery


Free assignment of the functions switching, dimming, blind and value transmitter to the inputs.
Blocker for blocking individual inputs.
Behaviour upon bus voltage recovery can be configured separately for each input.
Telegram rate limit.
Switching function: two independent switching objects are available for each existing input and can be enabled individually, command for leading and trailing edge can be set independently (ON, OFF, CHANGE, no reaction).
Dimming function: single-surface and double-surface operation, time between dimming and switching, and dim-step size can be set, telegram repetition and stop telegram transmission possible.
Blind function: Command can be set with rising edge (no function, UP, DOWN, CHANGE), operating concept can be configured (Step - Move - Step or Move - Step), time between short and long-term operation can be set, slat adjustment time can be set.
Value transmitter and light scene auxiliary unit function: edge (button as NO contact, button as NC contact, switch) and value with edge can be configured, value adjustment with button by pressing and holding button for value transmitters possible, light scene auxiliary unit with memory function and saving of the scene without previously calling up is possible.
Flush-mounted switching actuator, 1-gang with two binary inputs. Zero-voltage contacts can be connected to the two binary inputs. The two inputs can perform various functions or be blocked independently of each other in the process.
The factory settings assign Input "1" to the switching actuator, enabling operation without programming.
Output can be parameterised as NO contact or NC contact
Selection of preferred position for bus power failure and recovery.
Switch-on/off delay or time switch function can be set.
Output with three objects: switching, feedback, and additional function (linking, block function, or forced setting)
Feedback object can be inverted.

Technical data

Ambient temperature: -5 °C to +45 °C
Rated voltage: AC 250 V, 50/60 Hz
Switching current: 16 A
Relay contact: 1 x zero-voltage NO contact

Connected load
Light bulbs: 2500 W
HV halogen lamps: 2200 W
Wound transformer: 1000 VA
Gira Tronic transformer: 1000 W
Capacitive load: 10 A, max. 105 µF
Number of inputs: 2 x zero-voltage

More Information
More Information
SKU GIR105900
Manufacturer GIRA
Type Switch Actuator
Medium KNX TP
Installation Flush Mounted
Channels 1