Manual actuation of the relay independent of the bus or switching position indication.
NO contact or NC contact operation.
Central switching function.
Group feedback for reduction of bus load.
Active or passive (object can be read out) cyclical feedback function.
Feedback can be delayed until after the recovery of bus voltage.
Logical linking function for each output.
Block function can be parameterised for each channel. As an alternative, forced setting function for each output.
Time functions (switch-on/off delay, staircase light function – also with advance warning function).
Integration in light scenes is possible, eight internal scenes at the most can be parameterised per channel.
Memory function for light scenes.
Elapsed operating time meter as forward/backward counter with limit function (limit can be changed via bus) can be activated for each output.
Input monitoring for cyclical updating with safety setting.
Reactions in case of bus voltage failure and restoration can be set for each channel following an ETS programming process.
The switching contacts of the switching actuator, 8-gang, C-load are especially designed for loads with a capacitive character, and therefore conditional, brief, high switch-on currents (see Technical Data).
The switching actuator has an integrated current detection.
A current measurement can be carried out for each channel.
Current detection: Measurement of load current for each channel.
Threshold values for load monitoring (e.g. signalling of load failure).
Independent switching of the eight outputs.
KNX: Connection and junction terminal
Load: Screw terminals
Contact: 1 x zero-voltage NO contact each, flip-flop
Switching capacity AC 230 V: 16 A / AC1 or 16 A / AC3
Switching capacity AC 400 V: 10 A / AC1 or 10 A / AC3
Maximum switch-on current: 600 A, 150 µs, 300 A, 600 µs
Ohmic load: 3680 W
Capacitive load AC 230 V: 16 A, max. 200 µF
Light bulbs: 3680 W
HV halogen lamps: 3680 W
Wound transformer: 2000 VA
Gira Tronic transformer: 2500 W
Fluorescent lamps, uncompensated: 3680 VA
Fluorescent lamps, duo-circuit: 3680 VA
Fluorescent lamps, parallel-compensated: 2500 VA
Mercury-vapour lamps, uncompensated: 3680 W
Mercury-vapour lamps, parallel-compensated: 3680 W
Connections: max. 4 mm²
Current detection: 0.25 to 16 A sine
Current detection: 50/60 Hz