Steinel Light Sensor Dual KNX

STE011727C
Available for 5-7 working days Delivery
£130.33
Details


Light measurement in perfection. The Light Sensor Dual photo-cell controller with KNX interface measures directed and diffuse light, watches over areas below the sensor and measures the room brightness. Combining the measurement results reduces error influences. Available either in round or square surface-mounted and concealed version.
The duality of light measurement.
No matter whether focused or diffuse measurements are needed - both work with the Light Sensor Dual! The challenge must not be underestimated. To obtain usable information on the lighting situation in a room, it is not sufficient simply to determine general brightness. It is important to use a combination of measuring the light level at the desk, for example, and determining diffuse room brightness. This way, errors can be ruled out for better lighting control. And the STEINEL Light Sensor Dual is simply perfect for this.
Technical Specifications
Dimensions(w x h x d): 54 x Ø 124 mm
Type of sensor: Built-in light sensor
Voltage: KNX bus voltage
Sensor technology: Photodiode
Detection angle: specular and diffuse
Type: Photoelectric lighting controller
Application: indoors and outdoors
Installation: Wall, Ceiling
Suitable for C-load: No
With automatic night switch-off: Yes
Response brightness: 2 - 1000 Lux
Output, brightness: specular and diffuse
Output, constant-lighting control: Control governed by light level
Photo-cell controller output: Switching response governed by light level
Further outputs: Light level, sabotage protection
Operation temperature: -20-50 °C
Version: KNX - Surface installation, square
IP rating: IP20
Temperature range: -20-+50
Material: UV-resistant plastic
Model: KNX
Light measurement in perfection. The Light Sensor Dual photo-cell controller with KNX interface measures directed and diffuse light, watches over areas below the sensor and measures the room brightness. Combining the measurement results reduces error influences. Available either in round or square surface-mounted and concealed version.
The duality of light measurement.
No matter whether focused or diffuse measurements are needed - both work with the Light Sensor Dual! The challenge must not be underestimated. To obtain usable information on the lighting situation in a room, it is not sufficient simply to determine general brightness. It is important to use a combination of measuring the light level at the desk, for example, and determining diffuse room brightness. This way, errors can be ruled out for better lighting control. And the STEINEL Light Sensor Dual is simply perfect for this.
Technical Specifications
Dimensions(w x h x d): 54 x Ø 124 mm
Type of sensor: Built-in light sensor
Voltage: KNX bus voltage
Sensor technology: Photodiode
Detection angle: specular and diffuse
Type: Photoelectric lighting controller
Application: indoors and outdoors
Installation: Wall, Ceiling
Suitable for C-load: No
With automatic night switch-off: Yes
Response brightness: 2 - 1000 Lux
Output, brightness: specular and diffuse
Output, constant-lighting control: Control governed by light level
Photo-cell controller output: Switching response governed by light level
Further outputs: Light level, sabotage protection
Operation temperature: -20-50 °C
Version: KNX - Surface installation, square
IP rating: IP20
Temperature range: -20-+50
Material: UV-resistant plastic
Model: KNX
Light measurement in perfection. The Light Sensor Dual photo-cell controller with KNX interface measures directed and diffuse light, watches over areas below the sensor and measures the room brightness. Combining the measurement results reduces error influences. Available either in round or square surface-mounted and concealed version.
The duality of light measurement.
No matter whether focused or diffuse measurements are needed - both work with the Light Sensor Dual! The challenge must not be underestimated. To obtain usable information on the lighting situation in a room, it is not sufficient simply to determine general brightness. It is important to use a combination of measuring the light level at the desk, for example, and determining diffuse room brightness. This way, errors can be ruled out for better lighting control. And the STEINEL Light Sensor Dual is simply perfect for this.
Technical Specifications
Dimensions(w x h x d): 54 x Ø 124 mm
Type of sensor: Built-in light sensor
Voltage: KNX bus voltage
Sensor technology: Photodiode
Detection angle: specular and diffuse
Type: Photoelectric lighting controller
Application: indoors and outdoors
Installation: Wall, Ceiling
Suitable for C-load: No
With automatic night switch-off: Yes
Response brightness: 2 - 1000 Lux
Output, brightness: specular and diffuse
Output, constant-lighting control: Control governed by light level
Photo-cell controller output: Switching response governed by light level
Further outputs: Light level, sabotage protection
Operation temperature: -20-50 °C
Version: KNX - Surface installation, square
IP rating: IP20
Temperature range: -20-+50
Material: UV-resistant plastic
Model: KNX


More Information
More Information
SKU STE011727C
Manufacturer Steinel
Range KNX TP
Installation Ceiling Mounted