Theben LUNA 134 KNX

THE1349200
Available for 3-5 working days Delivery
£276.77
Details


• Light level controller
• External light sensor included in delivery
• For brightness-dependent controlling
• 10 channels
• 4 threshold values channels for connecting external KNX-sensors (e.g. temperature)
• 6 logic channels
• Up to 3 lights sensors can be connected
• Manual operation on device
• 4 keys for setting threshold and switch on/off delay
• DuoFix spring terminals
• For 2 conductors each
• Wire or strand (with or without wire end sleeve)
• Wire diameter: 0.5 - 2.5 mm²
• Button for releasing plug-in connection
• Display back light (can be turned off)
• Thresholds can be shown or changed on display
• PIN coding
Technical data
Operating voltage: 110 – 240 V AC
Frequency: 50 – 60 Hz
Operating voltage KNX: Bus voltage, ≤10 mA
Stand-by consumption: 0,8 W
Measuring range brightness: 1 – 100000 lx
On/off switching delay: 0 – 20 min
Number of channels: 10
Width: 3 modules
Installation type: DIN rail
Type of connection: Bus connection: KNX bus terminal | Sensor connection: DuoFix spring terminals
Max. cable cross section: 2 x 0.75 mm²
Max. cable length to sensor: 100 m
Ambient temperature: -5 °C … +45 °C
Protection class: II
Type of protection: IP 20
• Light level controller
• External light sensor included in delivery
• For brightness-dependent controlling
• 10 channels
• 4 threshold values channels for connecting external KNX-sensors (e.g. temperature)
• 6 logic channels
• Up to 3 lights sensors can be connected
• Manual operation on device
• 4 keys for setting threshold and switch on/off delay
• DuoFix spring terminals
• For 2 conductors each
• Wire or strand (with or without wire end sleeve)
• Wire diameter: 0.5 - 2.5 mm²
• Button for releasing plug-in connection
• Display back light (can be turned off)
• Thresholds can be shown or changed on display
• PIN coding
Technical data
Operating voltage: 110 – 240 V AC
Frequency: 50 – 60 Hz
Operating voltage KNX: Bus voltage, ≤10 mA
Stand-by consumption: 0,8 W
Measuring range brightness: 1 – 100000 lx
On/off switching delay: 0 – 20 min
Number of channels: 10
Width: 3 modules
Installation type: DIN rail
Type of connection: Bus connection: KNX bus terminal | Sensor connection: DuoFix spring terminals
Max. cable cross section: 2 x 0.75 mm²
Max. cable length to sensor: 100 m
Ambient temperature: -5 °C … +45 °C
Protection class: II
Type of protection: IP 20
• Light level controller
• External light sensor included in delivery
• For brightness-dependent controlling
• 10 channels
• 4 threshold values channels for connecting external KNX-sensors (e.g. temperature)
• 6 logic channels
• Up to 3 lights sensors can be connected
• Manual operation on device
• 4 keys for setting threshold and switch on/off delay
• DuoFix spring terminals
• For 2 conductors each
• Wire or strand (with or without wire end sleeve)
• Wire diameter: 0.5 - 2.5 mm²
• Button for releasing plug-in connection
• Display back light (can be turned off)
• Thresholds can be shown or changed on display
• PIN coding
Technical data
Operating voltage: 110 – 240 V AC
Frequency: 50 – 60 Hz
Operating voltage KNX: Bus voltage, ≤10 mA
Stand-by consumption: 0,8 W
Measuring range brightness: 1 – 100000 lx
On/off switching delay: 0 – 20 min
Number of channels: 10
Width: 3 modules
Installation type: DIN rail
Type of connection: Bus connection: KNX bus terminal | Sensor connection: DuoFix spring terminals
Max. cable cross section: 2 x 0.75 mm²
Max. cable length to sensor: 100 m
Ambient temperature: -5 °C … +45 °C
Protection class: II
Type of protection: IP 20
• Light level controller
• External light sensor included in delivery
• For brightness-dependent controlling
• 10 channels
• 4 threshold values channels for connecting external KNX-sensors (e.g. temperature)
• 6 logic channels
• Up to 3 lights sensors can be connected
• Manual operation on device
• 4 keys for setting threshold and switch on/off delay
• DuoFix spring terminals
• For 2 conductors each
• Wire or strand (with or without wire end sleeve)
• Wire diameter: 0.5 - 2.5 mm²
• Button for releasing plug-in connection
• Display back light (can be turned off)
• Thresholds can be shown or changed on display
• PIN coding
Technical data
Operating voltage: 110 – 240 V AC
Frequency: 50 – 60 Hz
Operating voltage KNX: Bus voltage, ≤10 mA
Stand-by consumption: 0,8 W
Measuring range brightness: 1 – 100000 lx
On/off switching delay: 0 – 20 min
Number of channels: 10
Width: 3 modules
Installation type: DIN rail
Type of connection: Bus connection: KNX bus terminal | Sensor connection: DuoFix spring terminals
Max. cable cross section: 2 x 0.75 mm²
Max. cable length to sensor: 100 m
Ambient temperature: -5 °C … +45 °C
Protection class: II
Type of protection: IP 20


More Information
More Information
SKU THE1349200
Color No
Manufacturer Theben
Manufacturers Reference Theben
Size No
Type Brightness Controller
Medium KNX TP
Installation Din Mounted
Module Size 3 Module