Generates an internal signal voltage for connecting two conventional push-buttons or floating
contacts, and for direct connecting two low-current LEDs.
The cores are 30 cm long and can be extended to max. 7.5 m. For installation in a conventional
60 mm switch box.
KNX software functions: Switching, dimming or controlling blinds via 1 or 2 inputs, position
values for blind control (8-bit), pulse edges with 1-, 2-, 4-, or 8-bit telegrams, differentiation
between short and long activation, initialisation telegram, cyclical transmission, pulse edges
with 2-byte telegrams, 8-bit linear regulator, scenes, counter, disable function, break contact/
make contact, debounce time. Outputs for connecting control lamps (low-current LEDs) for the
For each input/output object type:
Contact voltage: < 3 V (SELV)
Contact current: < 0.5 mA
Output current: max. 2 mA
Max. cable length: 30 cm unshielded, can be extended up to max. 7.5 m with twisted unshielded
Dimensions: approx. 40x30.5x12.5 mm (LxWxH)